How Do I Clean a VEVOR CIM-360T That Makes Cloudy or Poor-Quality Ice?
Exact model: VEVOR CIM-360T
Safety: Disconnect the relevant power source and isolate moving, hot or pressurized components before service.
A.
Start with the accessible checks
What this suggests: Cloudy, smelly or poor-quality ice can originate in scale-coated spray holes, the pump screen and water circuit, not necessarily in the refrigeration system.
What to do
- Power off, remove ice and drain the reservoir.
- Following the CIM-360T illustrated manual, undo the pump mounting bracket, disconnect the outlet tube, remove its inlet screen, turn the pump cover anticlockwise and clean the magnetic impeller.
Still not fixed? Continue to the next check.
↑ Back to the repair pathsB.
If the problem remains after the first checks
What to do
- Remove spray-pipe end plugs and flush blocked spray holes, then reassemble all seals and tubes in their original positions.
- Use the manufacturer's permitted descale/clean cycle and flush with clean water repeatedly (the manual specifies 4–6 rinse cycles after cleaning).
- Sanitize with the approved solution rather than mixing chemicals.
Confirm the repair
The water jet pattern is even, the first discarded ice cycles show no scale fragments or off-taste and the reservoir remains free of cleanser odor.