Why Doesn’t My Dreame D10 Plus Gen 2 Resume Cleaning After Charging?
Exact model: Dreame D10 Plus Gen 2
Safety: Disconnect the relevant power source and isolate moving, hot or pressurized components before service.
A.
Start with the accessible checks
What this suggests: Do Not Disturb scheduling and task type can prevent D10 Plus Gen 2 resume-after-charge; that is different from a battery that cannot reach the recharge threshold.
What to do
- Check the app's DND interval, active cleaning task and resume-cleaning setting, then observe a deliberately interrupted normal cleaning run.
- Ensure the charging contacts and dock supply are clean and the battery reaches the required charge level.
- Correct a conflicting schedule/DND window, then retest without changing the map.
Still not fixed? Continue to the next check.
↑ Back to the repair pathsB.
If the problem remains after the first checks
What to do
- If charging is faulty, follow the separate dock/charge repair path.
Confirm the repair
The robot resumes the same unfinished task after sufficient charge outside DND; no duplicate fresh task is started in its place.